Manual Drop Device with Laser for Triax Touch
Many surface impact attenuation standards and good maintenance practices allow for a single drop from a specified height. Instructions at xxxx explain how this is used for playgrounds and rugby fields. The user can “eyeball” the drop height when they are standing atop a ladder, only to perform the drop again if the height was too low. The drop handle for the TRIAXTouch with the laser measuring device confirms the drop height. This allows for more and faster testing ensuring better maintenance and compliance with Standards.
CPA also provides training in the test procedure and the use of the Manual Drop Device and the reporting software.
DOWNLOAD BROCHURE
Manual Drop Device with Laser for GFactor-Go
Many surface impact attenuation standards and good maintenance practices allow for a single drop from a specified height. Instructions at xxxx explain how this is used for playgrounds and rugby fields. The user can “eyeball” the drop height when they are standing atop a ladder, only to perform the drop again if the height was too low. The drop handle for the GfactorGO with the laser measuring device confirms the drop height. This allows for more and faster testing ensuring better maintenance and compliance with Standards.
CPA also provides training in the test procedure and the use of the Manual Drop Device and the reporting software.
DOWNLOAD BROCHURE
Manual Drop Device
Many standards such as ASTM F1292 and ASTM F3313 require that the person performing the impact testing find the least favourable location on the surface under test. In some cases this is obvious with areas of high wear or damage, but it is often difficult to make this determination without physically dropping the E missile. The Manual Drop Device allows for the substitution of the metal block that hangs from the Triax2015 tripod and suspension cable and hold the E missile in the hands for the person performing the test. This allows the tester to raise or lower the missile or move around the playground, field or any other surface under test and gather data. This data can be used to direct the location of the formal testing to the relevant standard.
CPA also provides training in the test procedure and the use of the Manual Drop Device and the reporting software.
DOWNLOAD BROCHURE
